Lamello Tenso P-10, with preload clip [1000pairs]
₹65,000.00 ₹81,250.00
Warranty
Not Applicable Country of origin
Switzerland GST Extra
18% Available on Request
Lamello Tenso P-10 with preload clip [1000pairs] — a genuine Lamello Swiss-engineered joinery solution, available in India through Caple, the authorised Lamello dealer. Trusted by furniture manufacturers, interior contractors, and fit-out specialists for invisible, precise, and professional-grade joinery. Keywords: Lamello Tenso, self-clamping connector, pull-tight joint, furniture assembly connector.
| Features → Advantages → Benefits | ||
|---|---|---|
| Feature / Fact | Advantage (So what?) | Benefit (You get / You save) |
| ▲ SAFETY | ||
| No tools, no fasteners — hand-push insertion only | Zero risk of over-torque or panel damage during assembly | Safe for semi-skilled and first-time assemblers on thin panels |
| ★ QUALITY | ||
| Invisible self-clamping connector for panels from 16 mm | Enables invisible permanent joinery on slim contemporary panels | Premium finish achievable even on entry-level panel thicknesses |
| Spring-loaded clamping — consistent load independent of operator | Every joint is equally tight regardless of assembler experience | Consistent quality across entire production run |
| ⚡ PRODUCTIVITY | ||
| Fastest permanent connector — hand-push only, no tools | Assembly station needs no powered tools at all | Maximum throughput; lowest cost per joint assembled |
| Preload clip option pre-installs connector in factory | Site or end-user pushes panels together; job done | Reduce on-site skilled labour requirement for modular furniture |
| ● RELIABILITY | ||
| Permanent fixed joint — for back panels, dividers, centre walls | Thin dividers and back panels held securely without edge screws | Cabinet structure rigid without visible fixings on thin panels |
| ₹ ROI | ||
| No glue consumables, no clamps, no drying bay for permanent joints | Production cost per joint lower than dowel-and-glue method | Payback within first production batch on typical 50-unit run |
| ✓ TRUST | ||
| Lamello P-System — Swiss-engineered, internationally standardised groove | Same groove as Clamex, Divario and Invis — no retooling needed | Connector choice can be changed without changing CNC programs |
Frequently Asked Questions
What is Lamello used for?
Lamello jointing systems create invisible, precise connections in wood panels, furniture boards, and solid wood — used for cabinet assembly, tabletops, shelving, and frame joints without visible fasteners.
Is Lamello better than pocket hole joinery?
Lamello Clamex P connectors are fully demountable and re-usable — ideal for flat-pack furniture, modular shelving, and exhibition stands where pieces must be assembled and disassembled repeatedly.
What is the Zeta P2 used for?
The Zeta P2 biscuit jointer cuts precise slots for Lamello Classic and H biscuits — used for alignment and gluing of panels, tabletops, and solid wood edges.
Does Caple provide Lamello consumables?
Yes — Caple stocks the full range of Lamello consumables including Classic biscuits, H biscuits, Clamex P connectors, Tenso P connectors, and Delta blades. Contact us at caple.in/contact.
Is there training available for Lamello products?
Caple conducts product demonstrations at our multiple demo centres across India. Contact us at caple.in/contact to schedule a demo.