![Lamello Clamex P-10 [1000Pairs]](/product-images/PRO_FOT_STA_Clamex-P-14-Paar__SALL__AIN__V1.jpg/2574649000091521794/300x300 "Lamello Clamex P-10 [1000Pairs]")
![Lamello Clamex P-10 [1000Pairs]](/product-images/PRO_ZEI_TECH_mit-Mass-Clamex-P-14__SALL__AIN__V1.jpg/2574649000091521804/300x300 "Lamello Clamex P-10 [1000Pairs]")
Lamello Clamex P-10 [1000Pairs]
₹80,000.00 ₹100,000.00
Warranty
Not Applicable Country of origin
Switzerland GST Extra
18% Available on Request
| Technical Specifications — Lamello Clamex P-10 | |
|---|---|
| Installation tolerance longitudinal | ± 0.5 mm |
| Installation tolerance radial | ± 0.5 mm |
| Minimum workpiece width | 65 mm |
| Minimum material thickness for edge cuts | 12 mm |
| Minimum material thickness for surface cuts | 11 mm |
| Minimum material thickness for centre wall machining | 19 mm |
| Minimum material thickness for angle bisector | 15 mm |
| P-System groove depth (P-System setting) | P-10 |
| Tensile strength in particle board | 540 N |
| Tensile strength in MDF | 700 N |
| Tensile strength in beech | 900 N |
| Shear strength in particle board | 420 N |
| Shear strength in MDF | 530 N |
| Shear strength in beech | 1590 N |
| Size (LxWxH) | 52 x 19 x 9.7 mm |
| Access hole diameter | 6 mm |
| Groove depth | 10 mm |
TEST
| FEATURE — ADVANTAGE — BENEFIT | ||
|---|---|---|
| Feature / Fact | Advantage (So what?) | Benefit (You get / You save) |
| QUALITY | ||
| Detachable furniture connector for thinner materials... | Detachable furniture connector for thinner materials. | groove depth of only 10 mm. |
| Smaller size than Clamex P-14, suitable... | Smaller size than Clamex P-14, suitable for materials from 12 mm thickness. | Delivers Swiss-engineered Lamello performance on every cut. |
| Connected and released using lever through... | Connected and released using lever through minimalist 6 mm access hole. | Delivers Swiss-engineered Lamello performance on every cut. |
| Ideal for mitre connections and sharp... | Ideal for mitre connections and sharp angles in thin panel materials. | Delivers Swiss-engineered Lamello performance on every cut. |
| Near-invisible joint aesthetics — almost completely... | Near-invisible joint aesthetics. | almost completely concealed. |
| No adhesive required — flat-pack friendly... | No adhesive required. | flat-pack friendly, detachable multiple times. |
| Stackable — no protruding parts during... | Stackable. | no protruding parts during transport. |
| PRODUCTIVITY | ||
| Anchored in the P-System groove in... | Anchored in the P-System groove in seconds without tools. | Delivers Swiss-engineered Lamello performance on every cut. |