Detachable furniture connector — can be assembled and dis…

Detachable furniture connector — can be assembled and disassembled multiple times

Anchored in the form-locking P-System groove in seconds —…

Anchored in the form-locking P-System groove in seconds — no tools required for installation

Connected and released using a lever through a minimalist…

Connected and released using a lever through a minimalist 6 mm access hole (similar to a cam connector)

Near-invisible joint aesthetics — 6 mm access hole is alm…

Near-invisible joint aesthetics — 6 mm access hole is almost completely concealed

What is the Lamello Clamex P-14?

The Lamello Clamex P-14 is a p-system connector (detachable) — Detachable furniture connector — can be assembled and disassembled multiple times

What groove is required for the Clamex P-14?

The Clamex P-14 requires a groove milled with the Lamello Zeta P2 biscuit joiner or a CNC machining centre. Groove depth: 14 mm.

What is the minimum material thickness for the Clamex P-14?

Minimum material thickness is 12 mm. Please refer to the technical specifications above for all thickness requirements.

Is the Clamex P-14 detachable?

Yes, it can be connected and disconnected multiple times without tools or adhesive — ideal for flat-pack and RTA furniture.

How many connectors are needed per joint?

Typically 2–4 connectors per linear joint depending on panel size and load requirements. Our trained team can advise on the optimum count for your specific application.

Does caple.in supply the Clamex P-14 in bulk?

Yes, caple.in supplies Lamello connectors in both trial quantities and bulk packs (up to 1000+ pairs). Contact us for volume pricing.

What is the tensile strength of the Clamex P-14?

Tensile strength is 1070 N in particle board. Performance varies by substrate — see specifications for MDF and solid wood values.

Can the Clamex P-14 be used for mitre joints?

Yes, this connector is compatible with butt joints and mitre joints at almost any angle (22.5° to 180°).