Detachable furniture connector for thinner materials — gr…

Detachable furniture connector for thinner materials — groove depth of only 10 mm

Smaller size than Clamex P-14, suitable for materials fro…

Smaller size than Clamex P-14, suitable for materials from 12 mm thickness

Anchored in the P-System groove in seconds without tools…

Anchored in the P-System groove in seconds without tools

Connected and released using lever through minimalist 6 m…

Connected and released using lever through minimalist 6 mm access hole

What is the Lamello Clamex P-10?

The Lamello Clamex P-10 is a p-system connector (detachable, thin materials) — Detachable furniture connector for thinner materials — groove depth of only 10 mm

What groove is required for the Clamex P-10?

The Clamex P-10 requires a groove milled with the Lamello Zeta P2 biscuit joiner or a CNC machining centre. Groove depth: 10 mm.

What is the minimum material thickness for the Clamex P-10?

Minimum material thickness is 12 mm. Please refer to the technical specifications above for all thickness requirements.

Is the Clamex P-10 detachable?

Yes, it can be connected and disconnected multiple times without tools or adhesive — ideal for flat-pack and RTA furniture.

How many connectors are needed per joint?

Typically 2–4 connectors per linear joint depending on panel size and load requirements. Our trained team can advise on the optimum count for your specific application.

Does caple.in supply the Clamex P-10 in bulk?

Yes, caple.in supplies Lamello connectors in both trial quantities and bulk packs (up to 1000+ pairs). Contact us for volume pricing.

What is the tensile strength of the Clamex P-10?

Tensile strength is 540 N in particle board. Performance varies by substrate — see specifications for MDF and solid wood values.

Can the Clamex P-10 be used for mitre joints?

Yes, this connector is compatible with butt joints and mitre joints at almost any angle (22.5° to 180°).