Nanxing Sliding Table Saw MJK1132F1 415V [3200 mm Table | 1200mm Digital Rip-cut Fence | 6.6 kW | DRO on Crosscut Fence]
₹750,000.00 ₹937,500.00
Available on Request
The Nanxing Sliding Table Saw MJK1132F1 415V [3200 mm Table | 1200mm Digital Rip-cut Fence | 6.6 kW | DRO on Crosscut Fence] is a precision sliding table panel saw engineered for accurate cross-cuts and rip-cuts in plywood cutting, MDF cutting machine operations, and solid wood processing. As a leading wood cutting machine, this panel saw machine delivers consistent dimensional accuracy for modular furniture machine lines processing kitchens, wardrobes, and cabinetry. Its extended sliding table and powerful main blade motor make it an industry staple in Indian furniture manufacturing.
Features → Advantages → Benefits
FEATURE
ADVANTAGE
BENEFIT
| SAFETY | ||
| 415 V / 50 Hz three-phase — standard Indian supply | No additional electrical infrastructure needed | Operational within hours of delivery and installation |
| Low maintenance cost — blade, belt, and fence service only | No hydraulics or CNC electronics to maintain on base models | Total annual maintenance cost under ₹20,000 |
| QUALITY | ||
| 3,200 mm or 3,800 mm sliding table — full panel capacity | Full 8 × 4 ft plywood or MDF sheet cuts in one pass | Dimensionally accurate panels direct from saw; no re-cutting |
| Scoring saw standard on MJK series — eliminates tear-out | Bottom face pre-scored before main blade cuts through | Cabinet-grade bottom edge on melamine and laminated boards |
| Digital readout (DRO) on rip fence and crosscut fence | Operator reads exact cut dimension without tape measure | Cut accuracy ±0.3 mm; consistent across all operators |
| 6.6 kW main motor at 4,000 RPM | Ample power for hardwood, MDF, and multi-layer plywood cuts | Clean, consistent cut even in 50 mm solid timber |
| 1,200 mm rip-cut fence travel | Wide panels cut to accurate width in one pass | No need for secondary equipment for wide rip cuts |
| PRODUCTIVITY | ||
| Long sliding table handles full sheet without helper | One operator manages 8 × 4 ft panel alone | Reduces labour from 2 persons to 1 for panel crosscut |
| Flip stops on crosscut fence for repeat dimensions | Set stop once; all identical parts cut to same dimension | Batch-cutting 50 identical shelves takes under 10 minutes |
| Quick-change blade system (tool-free on some models) | Blade swap completed in under 3 minutes | Minimal downtime for blade changes or material switches |
| Simultaneously rip-cut and cross-cut in one machine | Sliding table for crosscuts; rip fence for rip cuts | One machine replaces two separate saw setups |
| RELIABILITY | ||
| Heavy-duty cast iron or steel table surface | Flat, stable work surface resists daily production wear | Table flatness maintained to ±0.1 mm for machine lifetime |
| Precision-ground sliding table on hardened guide rail | Smooth, parallel travel maintained under full panel weight | Crosscut squareness ≤ 0.15 mm/m after years of use |
| Industrial V-belt drive with tensioning system | Consistent blade speed under variable material loads | Belt replacement simple and inexpensive — under ₹2,000 |
| Powder-coated steel frame for corrosion resistance | Protects frame in humid workshop environments | Machine retains professional appearance for years of use |
| Entry to mid-range investment — ₹4–12 lakh depending on model | Accessible for small and medium furniture manufacturers | Payback period 6–15 months at standard Indian production volumes |
| TRUST | ||
| Nanxing sliding table saws — 500+ units sold across India | Field-proven performance in Indian furniture factories | Strong brand reputation with available references |
Frequently Asked Questions
What is a sliding table panel saw used for in furniture manufacturing?
A sliding table panel saw is the primary machine for cutting full-size MDF, plywood, and particle board sheets into cabinet parts. The Nanxing MJK1132F1 has a 3200mm sliding table and cuts sheets up to 1200mm wide with a main blade and scoring saw for chip-free cuts on both faces.
What is the difference between the MJ1132F and MJ1138F Nanxing panel saws?
The MJ1132F has a 3200mm sliding table and handles standard 2440x1220mm sheet sizes. The MJ1138F has a 3800mm sliding table and can cut oversized panels and stacked multiple thin panels simultaneously. Both include a scoring saw for clean cuts on melamine and veneer faces.
What materials can the Nanxing sliding table saw cut?
MDF, particle board, plywood, melamine-faced board, solid wood, chipboard, and laminated boards. It is not suitable for stone, metal, or aluminium.
What is the price of a Nanxing panel saw in India?
Nanxing sliding table panel saws are priced from Rs 3,50,000 to Rs 6,50,000 in India depending on table length and features. Contact Caple for current pricing with GST.
Is Caple Industrial Solutions the authorised Nanxing dealer in India?
Yes. Caple Industrial Solutions is the authorised dealer for Nanxing woodworking machinery in India. We supply genuine Nanxing machines with full manufacturer warranty, factory-trained service engineers, and genuine spare parts. We have been supplying Nanxing machines in India since 2005.
Where can I see a Nanxing machine demo in India?
Caple Industrial Solutions has multiple demo centres across India. You can visit to see Nanxing machines running on actual furniture panels before purchase. Contact us at Contact Caple Industrial Solutionsor web@caple.in to arrange a visit.