Self-clamping connector for gluing — replaces clamps, pre…

Self-clamping connector for gluing — replaces clamps, presses and adhesive tape

Powerful tension springs anchor into counterpart and gene…

Powerful tension springs anchor into counterpart and generate high clamping pressure on the joint

Completely invisible — no openings or visible hardware af…

Completely invisible — no openings or visible hardware after assembly

Eliminates the need for clamps, presses, protectors or ta…

Eliminates the need for clamps, presses, protectors or tape during gluing

What is the Lamello Tenso P-14?

The Lamello Tenso P-14 is a p-system connector (self-clamping / gluing aid) — Self-clamping connector for gluing — replaces clamps, presses and adhesive tape

What groove is required for the Tenso P-14?

The Tenso P-14 requires a groove milled with the Lamello Zeta P2 biscuit joiner or a CNC machining centre. Groove depth: 14 mm.

What is the minimum material thickness for the Tenso P-14?

Minimum material thickness is 12 mm. Please refer to the technical specifications above for all thickness requirements.

Is the Tenso P-14 detachable?

This connector is designed for permanent assembly. For detachable options, see the Clamex P range.

How many connectors are needed per joint?

Typically 2–4 connectors per linear joint depending on panel size and load requirements. Our trained team can advise on the optimum count for your specific application.

Does caple.in supply the Tenso P-14 in bulk?

Yes, caple.in supplies Lamello connectors in both trial quantities and bulk packs (up to 1000+ pairs). Contact us for volume pricing.

What is the tensile strength of the Tenso P-14?

Tensile strength is Please refer to the technical specifications section above. in particle board. Performance varies by substrate — see specifications for MDF and solid wood values.

Can the Tenso P-14 be used for mitre joints?

Yes, this connector is compatible with butt joints and mitre joints at almost any angle (22.5° to 180°).