Wide Belt Sander

Wide Belt Sanders — Flawless Surfaces Before Finishing

Before any paint, lacquer or veneer can be applied, the panel surface must be perfectly smooth and uniformly thick. Surface quality sells furniture — a perfectly sanded panel takes paint evenly, feels smooth to the touch and looks professional. A poorly sanded panel shows every defect under lacquer.

What You Get

Flawless finish — calibration and sanding in one pass; every board comes out flat, smooth and ready for finishing
Consistent thickness — calibration heads ensure uniform panel thickness across the full width, critical for edge banding and assembly
Higher throughput — feed speeds up to 25 metres per minute mean you sand more boards per shift than manual sanding could ever achieve
Lower cost per board — automated sanding replaces four to five manual sanding operators with one machine operator

Popular Models: Nanxing Wide Belt Sander Series, SCM Sandya Series

Giantway Wide Belt Veneer Sander SGJ1300R-RB [ 1300mm Working Width | Roller + Roller | Total Power: 33.43kW ]

TECHNICAL DATA

- Model : SGJ1300R-RB

- Configuration : Roller + Roller

- Service Side : Right

- First roller diameter : 320mm

- Second roller diameter : 320mm

- First roller rubber hardness : Shore A 26

- Second roller rubber hardness : Shore A 22

- Working table height : 850mm

- Working width : 40-1300mm

- Working thickness : 1-100mm

- Feeding speed : 0-19m/min

- First belt speed : Max 12m/s (with inverter)

- Second belt speed : Max 12m/s (with inverter)

- Sanding belt size : 1330 x 2620mm

- Feeding belt size : 1300 x 3740mm

- Total power : 33.43kw

- First belt motor : 15kw

- Second belt motor : 15kw

- Motors position : Inside the machine

- Feeding motor : 3 kw

- Lift & decline motor : 0.18kw - 4P

- Brush motor : 0.25kw - 6P

- Working pressure : 0.4-0.8Mpa

- Compressed air consumption : 1 CBM/min

- Overall dimension : 2090 x 2370 x 2220mm

- Weight : About 4300kgs

- Machine Frame : Steel structure with 30mm steel board, 200mm tube steel, manganese steel beam and 120 x 60 steel tube; main motors positioned inside the body in a protected position

- Transmission : Main motor to working units with V-belts and pulleys

- Emergency Stop : Disk brakes on each working unit

- Standard Paint : Light white and blue

- Standard : Manufactured per CE regulations according to European general machine directive

- Lifting System : Double gear box to ensure lifting torque; double lifting chains for power transmission

- Lifting Columns : Ball screws inside the lifting column for precise and smooth lifting

- Pressure System : Pressing units positioned in front and rear of each working unit hold workpieces on the conveyor belt

- Press Rollers : Three spring-loaded press rollers with disc springs compensate panel thickness difference; assembled on easy-to-adjust roller holders

- Feeding Table : Fixed table for a constant passline; steel construction with planarity tolerance within 0.05mm; fine-ground and heat-treated surface to avoid conveyor belt wear

- Conveyor Belt : Rubber surface at appropriate hardness; top profile according to operation requirement

- Feed Drive : Motor with bevel gear reducer; feeding speed continuously variable from 0 to 19m/min

- Feed Table Extension : Front side extension with steel idle rollers

- Working System : Working system moves up & down

- 1st Working Unit : Dia 320mm rubber sanding roller with sanding belt tension unit, electronic oscillation, dust hood and safety systems

- 2nd Working Unit : Same as 1st working unit; Dia 320mm rubber sanding roller with sanding belt tension unit, electronic oscillation, dust hood and safety systems

- Sanding Roller : Helicoidal grooves for cooling; SKF bearings inside

- Sanding Motors : Motor with inverter for variable belt speed

- Belt Cleaning : Air jet blowers clean and cool the sanding belt

- Belt Tension Unit : Tension roller, tension switch, limit switch, tension pressure meter and eccentric shaft

- 3rd Working Unit (Cleaning System) : Rotary air jet blowers and top cleaning brush for cleaning the panels

- Bottom Cleaning Brush : Under the feeding table; cleans the conveyor belt to avoid secondary contamination

- Electric System : Electric plant at the front of the machine with main switch, PLC, contactors, breakers, transformer and inverters; built on standard CE rules

- Electric Parts : Teco brand

- Sensors : Banner sensor; Omron limit switch

- Pneumatic System : Oil/air nebulizer, solenoid valve and air pressure relay; AirTAC brand pneumatic parts

- Control System : Front control panel with push buttons and micro computer; ampere meter, touch screen and table up & down buttons

₹4,050,000.00 ₹5,062,500.00

Wide Belt Sander with Double Belt SGJ1300R-RPA [STANDARD STEEL ROLLER | + COMBINATION (ROLLER AND PAD) | TOTAL Power: 40.62KW]

Technical Specifications

• Model / Type : SGJ1300R-RPA (Standard Type)

• Contact Roller Diameter (mm) : 240

• Calibrating Roller Diameter (mm) : 210

• Working Width (mm) : 40 – 1300

• Working Thickness (mm) : 2.5 – 150

• Feeding Speed (m/min) : 0 – 19

• First Belt Speed (m/s) : 24

• Second Belt Speed (m/s) : 18

• Sanding Belt Size (mm) : 1330 × 2200

• Total Power (kW) : 40.62

• First Belt Motor Power (kW) : 22

• Second Belt Motor Power (kW) : 15

• Motors Position : Inside

• Feeding Motor Power (kW) : 3 (Inverter)

• Lift & Decline Motor Power (kW) : 0.37

• Brush Motor Power (kW) : 0.25

• Working Pressure (MPa) : 0.4 – 0.8

• Compressed Air Consumption (CBM/min) : 1

• Overall Dimensions (mm) : 2300 × 2000 × 2120

• Weight (kg) : 3600

₹2,100,000.00 ₹2,625,000.00

Lacquered Panel Wide Belt Sander DW-13025A

STANDARD SPECIFICATIONS:

Sanding belt oscillation controlled by photocell sensor.
Microcomputer controlled thickness setting.
Automatic control for conveyor belt tracking.
Front and rear head equipped with rubber covered pressure roller.
Levelling adjustment for sanding drum and pressure device.
Independent start controls for main motor.
Panel cleaning brush roller
Motor overload protection.
Feed speed is controlled by Variable Speed.
The conveyor belt is Heavy Duty type.
The machine body I made by all steel, not be wired by H iron.
The speed of Sanding belt & Scotch Brite Roller are controlled Inverter.
Air jet sanding belt cleaning device.
Emergency Stop Device
- Sanding belt break or midtrack.
- Power failure.
- Main Motor overload.

TECHNICAL DATA:

₹4,800,000.00 ₹6,000,000.00

Wide Belt Sander with Planer+drum WT-KR1300

TECHNICAL DATA

• Max. Working width : 1300mm

• Min. Working Length : 280mm

• Working Thickness : 10-150mm

• First unit: planer Diameter : 80mm

• Second unit: Diameter : 240mm

• First Unit: Motor : 30kw

• Second Unit: Motor : 22kw

• Conveyor belt: Motor : 4kw

• Lifting Motor : 0.55kw

• Brush roller: Motor : 1.5kw

• Total Power : 58kw

• First unit : planer

• Second unit : 80HA

• Conveyor belt: Speed : 5-24m/min

• Abrasive Belt Size : 1350*2620mm

• Air Pressure : 0.6Mpa

• Overall Dimensions : 223x×2700×2450-2600mm

• Worktable height : 900mm

• Net Weight : 4600 kgs

• Air jet cleaning for sandpaper : YES

• Table : Fixed

• Conveyor belt centered automatically : YES

• PLC control : YES

• Iron pallet with soft package : YES

• Voltage : 415v/50hz/3phase

• Production lead time : 55days GENERAL

FEATURES

• Body Frame

• The base has a strong body frame in welded steel, to guarantee the stability and durability of the entire structure.

• All laser cutting, no seam gaps. This can make sure the sanding precision.

• All the body frame steel is annealing process. Reduce the internal stress of steel and ensure the stability of the overall machine. Base * steel structure with electric cabinet on the machine front

• Equipped with a thick, wear-resistant stainless steel work table that guarantees precision and sturdiness during any type of machining operation. * The work table is positioned at 900mm from the ground, thus ensure ease of panel loading and unloading. * sanding belts introduction from the machine right side * powered adjustment of working thickness * main motor positioned inside the base Electrical equipment * automatic star-delta start of the main motor * overload protections on the motors * IP54 motor protection Emergency and safety devices * safety detection for over-thickness * Disc brakes. This motorcycle-drived system guarantees speed and safety. * automatic brake for rapid shutdown of the operating group * front and rear emergency push-button * padlockable main switch * automatic emergency stop machine for:

• sanding belt breaking

• not-tensioned sanding belt

• lateral outplacement of sanding belt

• absence of compressed air

• overload on main motor

₹4,450,000.00 ₹5,562,500.00

Heavy Duty, Wide Belt Sander with belt 52" x 83"

• FEATURES 1. Sanding belt oscillation controlled by photocell sensor. 2. Microcomputer controlled thickness setting. 3. Automatic control for conveyor belt tracking. 4. Front and rear head equipped with chrome plated pressure plate & rubber covered pressure roller. 5. Leveling adjustment for sanding drum and pressure device. 6. Independent start control for main motor. 7. Automatic 2

• Step startinging on main motor. 8. Motor overload protection. 9. Emergency Stop Device -- Sanding belt break or mistrack. Power failure. Main Motor overload. 10. Variable feed speed 11. The conveyor belt is Heavy Duty type. 12. The machine body is made by all steel, not be wired by H iron.

TECHNICAl DATA

• Main Motor: 40.30 HP Feed Motor: 5 HP Table Hoist Motor: 1 HP Sanding Belt: 52" x 75" Panel Cleaning Brush Roller 1 Set Air Jet Sanding Belt Cleaning Device 2 Set

₹4,200,000.00 ₹5,250,000.00

Heavy Duty, Wide Belt Sander with belt 52" x 75"

TECHNICAl DATA

• Main Motor: 40.30 HP Feed Motor: 5 HP Table Hoist Motor: 1 HP Sanding Belt: 52" x 75" Panel Cleaning Brush Roller 1 Set Air Jet Sanding Belt Cleaning Device 2 Set

₹3,950,000.00 ₹4,937,500.00