SCM Beam Saw Machine with mobile saw unit designed to cut solid wood panels, chipboards, MDF panels, multilayer panels, plywood panels and fiber panels.
STRUCTURE AND BASE
- Steel tubular structure;
PRESSURE BEAM
- Pressure beam with even pressure on entire cutting length,
- Pneumatic vertical adjustment with precision racks and pinions, pressure adjustable from 1,5 to 6 bar;
- Double dust conveying system: one on the top applied directly to the pressure beam to keep the working table clean and one on the bottom applied to the saw carriage
WORK TABLES
- Three front tables (1 table with squaring fence + 2 support tables) and 3 rear tables (1 table with squaring fence + 2 bakelite-coated support tables).
- Each rear support table is equipped with one stop
- Front and rear squaring fences are equipped with one stop;
SAW BLADE UNIT
- 1 motor for the main blade and 1 motor for the scoring blade;
- saw carriage driven by chain;
- Sliding on steel guide and special bronze wheels;
- Adjustment of the saw blade unit return point on the entire cutting width;
CONTROL UNIT
- Mobile command panel to control the machine on both working sides (front and rear)
SAFETY REGULATIONS
- Emergency bar on cutting line, on the front and rear working sides;
- Front safety protection with plastic fingers with compass movement
- Electrical board with high safety features complete with:
*dust-proof cabinet (ip 55 protection) with padlockable main switch;
* Overload motor protection;
* Auxiliary low voltage circuit for the commands, the electronic controls and low voltage signals;
* safety microswitch on blade access door;
TECHNICAL DATA:
- maximum squaring stroke [mm] : 2900
- saw blade diameter : 250
- saw blade bore diameter [mm] : 55
- max. saw blade projection [mm] : 55
- blade rotation speed [rpm] : 4700
- scoring blade diameter [mm] : 115
- scoring blade bore diameter [mm] : 45
- saw blade feed speed [m/mm] : 10 to 30
- saw blade feed (return speed) [m/mm] : 30
Analogical adjustment of return point
- no. 2 tables with fence [mm] : 2000 x 380
- no. 4 support tables [mm] : 1250 x 380
Other technical features:
- saw blade motor power : 3,7 kW (5 hp)
- scoring blade motor power [mm] : 0,55 kW (0,75 hp)
- exhaust hoods diameter [mm] : 100 (1) , 150 (1)
- Additional saw blade Set :