Combination Machine having Surfacing, Thicknessing, Sawing, Moulding along with Scoring saw & Special Xylant Cutter with 2600mm Sliding table features.
STANDARD EQUIPMENTS
- Cast iron saw unit, with lifting system by means of "dove-tail" guideways and tilting on high rigidity sliding side trunnions, complete with scoring unit with independent motor and external setting up
- Anodized aluminium alloy carriage (dimensions 360 x 2250 mm) sliding on hardened steel guides, which are fixed on the carriage by means of mechanical bending system
- Squaring frame (dimensions 1200 x 650 mm) with:
* telescopic fence with 2 flip-over stops and metric rule tilted towards the
operator
* eccentric clamp
* swinging arm support
* idle roller to facilitate the panel loading/unloading
- Dedicated saw parallel fence with:
*"high rigidity" cast iron fence support
* micrometric adjustment and cam-locking system
* rectified steel round sliding bar, 45 mm diameter
- Surface planer tables with simultaneous opening
- Dedicated surface planer fence (dimensions 1800 x 150 mm) complete with "high rigidity" cast iron support and sliding
on steel round bar
- Thicknessing table lifting by means of 4 columns dust protected
- Helicoidal thicknesser infeed roller
- Sandblasted steel thicknesser outfeed roller
- Spindle moulder reverse rotation
- Spindle moulder speed readout by LEDs
- Adjustable spindle moulder fence, with reference pins for easy re-positioning and numeric readout for micrometric
adjustments
- Pre-setting for mortiser
- Units adjustment hand wheels ergonomically positioned on the front of the machine
- Mechanical readouts (1/10 mm) for blades tilting, thicknessing table height and spindle moulder position
- 2 saw blade rotating speeds (3500/5000 rpm)
Cast iron mortiser
complete with 120 mm diam. exhaust hood and 16 mm chuck
- Table dimensions 470 x 230 mm
- Strokes X= 160 mm Y= 120 mm Z= 110 mm
- 0-16 mm self-centering (Wescott type) chuck
- Rubber-coated feed roller on thicknesser outfeed
"Xylent" spiralknife cutterblock with 3 series of knives
complete with:
- no. 66 plates 15x15x2,5mm with 4 selflocking and selfcentering screw knives
- no. 1 dynamometric key for the correct and safe use of the locking
- no. 2 inserts for the dynamometric key
Xylent maintenance kit
Case complete with:
- 01 cleaning/degreasing liquid bottle for the resins cleaning
- 01 dynamometric key set to 5,7 Nm
- 02 bit Torx T20
- 10 inserts 15x15x2,5
- 05 screws M6x15 T20
- 01 brass bristle brush to clean the spindle with mounted inserts
- 01 steel bristle brush to clean the inserts housings
Anodized aluminium tables for spindle moulder fence
- Tiltable spindle moulder 90���? ������ 45 ���?
- equipped with fixed handwheel with gravitational numerical readout of spindle moulder tilting
Interchangeable spindle
- 100 mm max. height (70 if 3/4")
Spindle moulder shaft of 30 mm diam.
TECHNICAl SPECIFICATION
PLANER
- useful working width [mm] : 410
- cutter block diameter (mm)/n. standard knives : 95/4
- standard knives dimensions [mm] : 410 x 30 x 3
- max. stock removal [mm] : 5
- surfacing tables total length [mm] : 2200
- thicknessing table dimensions [mm] : 410 x 775
- feed speed on thicknesser [m/min] : 44901
- min. ������ max. working height on thicknesser [mm] : 3 ������ 240
- min. working length on thicknesser [mm] : 180
CIRCULAR SAW
- cast iron saw-spindle moulder worktable dimensions [mm] : 1380 x 465
- blades tilting : 90��� ������ 45���
- max. saw blade diameter with scoring blade installed [mm] : 350
- max. saw blade projection from table at 90���/45��� [mm] : 117/84
- scoring blade diameter [mm] : 120
- max. squaring stroke (standard) [mm] : 2250
- cutting width on parallel fence (standard) [mm] : 1000
SPINDLE MOULDER
- max. useful spindle length [mm] : 125*
- spindle moulder speeds (at 50 Hz) [rpm] : 3500/6000 / 8000/10.000
- max. tool diameter when profiling [mm] : 240
- max. diameter of tool lowered under the table at 90��� [mm] : 240
- three-phase motors S6 : 5kW (6,6hp) 50Hz - 6kW (8hp) 60Hz - three-phase motor (scoring) : 0,65kW 0,9Hp 50Hz
- exhaust outlets diameter [mm] : 120
- Spindle moulder shaft Dia. : 30 mm