MAIN ADVANTAGES
- WORKING SYSTEM: quick setup, high quality of the cut work pieces,
reduced overall dimensions, low energy consumption and high performance are
the main advantages of the fit-55 beam saw
- EASY-TO-USE: Intuitive and simple operations
GENERAL CHARACTERISTICS
- Manual horizontal beam saw designed to cut solid wood panels, chipboards, MDF panels, multilayer panels, plywood
panels and fiber panels.
STRUCTURE AND BASE
- Steel tubular structure;
- Central foot;
- Work table in reinforced ribbed steel and bakelite coated
PRESSURE BEAM
- Pressure beam with even pressure on entire cutting length,
- Pneumatic vertical adjustment with precision racks and pinions, pressure adjustable from 1,5 to 6 bar;
- Double dust conveying system: one on the top applied directly to the pressure beam to keep the working table clean and one on the bottom applied to the saw carriage
WORK TABLES
- Three front tables and three rear tables, one table with squaring fence plus two bakelite-coated support tables in
each side (front and rear).
- Rear support tables with stops, one stop for each rear support table;
- Front and rear squaring fences with 1 mechanical stop for each fence;
SAW BLADE CARRIAGE
- 1 motor for the main blade and 1 motor for the scoring blade;
- saw carriage driven by chain;
- Sliding on steel guide and special bronze wheels;
- Adjustment of the intermediate saw carriage return point on the entire cutting width;
- Mechanical system for blades changeover;
CONTROL UNIT
- Rotative console to control the machine on both working sides (front and rear)
SAFETY REGULATIONS
- Emergency bar on cutting line, on the front and rear working sides;
- Front safety protection with plastic fingers with compass movement
- Electrical board with high safety features complete with:
* dust-proof cabinet (ip 55 protection) with padlockable main switch;
* Overload motor protection;
* Auxiliary low voltage circuit for the commands, the electronic controls
and low voltage signals;
* safety microswitch on blade access door ;
INCLUDES:
- TM.06.37 - FIT 55 - Horizontal beam saw
- TM.05.95 - Machine version 380V - 50HZ
- TM.05.97 - Safety regulations - Brasil
- OF.02.31 - Saw carriage features
- Independent motor for saw and scratcher;
- Traction through fixed current;
- Quick change system of the saws;
- OF.02.27 - Analogic return control (potentiometer)
- OF.02.29 - Main blade motore 7,5 Hp and scoring blade motor 0,75 Hp
- OF.02.24 - Fixed table with fence 2000x380mm (1) and support tables 1250x380mm (2)
- OF.02.26 - Fixed table with fence 2000x380mm (1) and support tables 1250x380mm (2)
- TM.06.48 - 2No. Additional stops for the support tables
- TM.06.61 - Additional blades set for Fit 55