SCM Spindle Moulder CLASS TI 120 CE with LL Version 1 1/4" Spindle
₹1,375,000.00 ₹1,718,750.00
Available on Request
TECHNICAL DATA:
- Worktable dimensions [mm] : 1200x810
- Spindle tilting [degrees] : +45° / -45°
- Working length of spindle (NO C.E.) [mm] : 180 (180)
- diam. [mm] : 30
- Spindle base projection from table [mm] : 25
- Spindle base projection from table with interchangeable spindle [mm] : 53
- Max tool diam. retractable under worktable with rings (with "Fast" section table) [mm] : 320x60
- Spindle fence stroke with mechanical programming (positioning with respect to the spindle axis) [mm] :
125 (from -90 to +125)
- External diameter of exhaust outlet on spindle moulder hood [mm] : 120
- External diameter of exhaust outlets on base (for the forced electrospindle aircooling 7,5 kW) [mm] : 2x80
- Air flow speed of exhaust system [m/s] : 20
- Exhaust system air consumption [m3/h] : 1550
STANDARD MACHINE:
- Manual tool-holder shaft lifting, complete with mechanical readout of working height
- Max. tool diam. 250 mm
- 3000/4500/6000/7000/10000 rpm spindle speeds
- Speed display dial (CE and electrical protections versions)
- Spindle moulder fence with mechanical adjustment
- Aluminium fence instead of wooden fence
- 7kW 50Hz motor power
- LL version with 2 cast-iron profiling extensions
- Carriage on fixed table for small tenoning operations
- MK4 interchangeable spindle
- Spindle moulder shaft of 30 mm diam
- Locking without slot
SAFETY & PROTECTION
- Emergency pushbutton
- Safety microswitch on motor access door
- Padlock able main switch
- Overload switch protection
- Auxiliary low voltage circuit (110 volt)
TEST
CONSISTING
- 10.99.99 : Security execution
- R1.30.53 : class ti 120 CE version
- 93.07.31 : Volt 400 EU
- 93.12.01 : Frequency 50 Hz
- 57.02.21 : Spindle moulder fence with mechanical adjustment
- 24.01.54 : Aluminum fence instead of wooden fence
- 57.02.51 : 7kW 50Hz (8kW 60Hz) motor power
- 57.01.41 : "LL" version with 2 cast-iron profiling extensions
- 26.01.13 : MK4 interchangeable spindle
- 13.13.05 : Spindle moulder shaft of 1 1/4"
- 21.13.13 : Locking by nut
- 21.13.14 : Locking without slot
- 08.74.10 : Seaworthy packing (basic machine and "LL" version)
- 10.99.91 : Machine language: ENGLISH