Scm Automatic Wide Belt Sander DMC-SD-60(B)RCS135
₹3,100,000.00 ₹3,875,000.00
Available on Request
The new SCM compact wide belt sander: it is extremely versatile and allows the calibrating of MDF, chipboard. etc, the calibrating and sanding of solid wood, the pre-sanding and sanding of veneered panels and the finishing of painted surfaces.
MACHINES STANDARD EQUIPMENT:
- dmc sd 60 composition RCS 135
with 1st ���������R���?� group (roller) and 2nd ���������CS���?� combined group (roller/pad)
- R140/85 - 85 Sh rubber-coated calibrating roller, 140mm diameter, in 1st position
- R160/45 - 45Sh rubber-coated sanding roller, 160mm diameter, in 2nd position
- Stiff pad with manual adjustment of working height
- 11 kW (15 Hp) single main motor
- Electronic ammeter on main motor for readout of absorbed power
- Electronic readout of working thickness
- Electronic oscillating of sanding belts
- Rubber-coated pressure rollers
- Infeed anti-kickback vertically pivoted roller on 1st operating group
- 60 Sh rubber feed belt
- Infeed/outfeed workpieces support rollers with two rollers
- Feed belt speed with 2-speeds variable feed motor ( 4,5 / 9 m/min)
- Automatic device for feed belt tracking and tensioning
- Security execution
- dmc sd 60 composition RCS 135
- Volt 400 EU
- Frequency 50 Hz
B version for RCS
- on/off pneumatic selector of the roller on the 1st ���������R���?� group
- on/off pneumatic selector of the roller on the 2nd ���������CS���?� group
- ���������MESAR���?� elastic sectional pad
- on/off pneumatic selector of the pad
- ���������Logic 50 K���?� electronic programmer
- electronic positioning for working table
Infeed and outfeed support rollers for long and short workpieces
- The infeed support rollers is equipped with 5 idle rollers and the outfeed one is equipped with 1 powered roller and 4 dle rollers
Oscillating belt cleaning blower on the 2nd group
- electronic tracking
- timer activated directly on working piece
- exhaust hood
- filter and pressure adjustment
Belt feed with 0,75 kW (1 hp) mechanical speed variator
- with adjustable feed belt speed from 3,5 to 18 m/min
RA Helicoidal grooved steel calibrat. roller-1st group
2-speed main motor 11 kW (15 hp) (9/18 m/sec)
TECHNICAL DATA:
- working width [mm] : 1350
- min/max. working thickness [mm] : 4-170
- sanding belt width [mm] : 1370
- sanding belt length [mm] : 2150
- main motor power [kW (HP)] : 11 (15)
- Feed belt motor power [Kk (HP)] : 0,45/0,8 (0,6/1,1)
- Feed speed [m/min] : 4,5/9