Caple Industrial Solutions
Currency
0
Scm Horizontal Beam Saw (R001701)

Scm Horizontal Beam Saw (R001701)

₹1,520,000.00 ₹1,900,000.00
Warranty
12 Months
Country of origin
Italy
GST Extra
18%
MAIN ADVANTAGES
- WORKING SYSTEM: quick setup, high quality of the cut work pieces,
   reduced overall dimensions, low energy consumption and high performance are
   the  main advantages of the fit-55 beam saw
- EASY-TO-USE: Intuitive and simple operations

GENERAL CHARACTERISTICS
- Manual horizontal beam saw designed to cut solid wood panels, chipboards, MDF panels, multilayer panels, plywood 
  panels and fiber panels.

STRUCTURE AND BASE
- Steel tubular structure;
- Central foot;
- Work table in reinforced ribbed steel and bakelite coated

PRESSURE BEAM
- Pressure beam with even pressure on entire cutting length,
- Pneumatic  vertical adjustment with precision racks and pinions, pressure adjustable from 1,5 to 6 bar;
- Double dust conveying system: one on the top applied directly to the pressure beam to keep the working table clean    and one on the bottom applied to the saw carriage

WORK TABLES
- Three front tables and three rear tables, one table with squaring fence plus two bakelite-coated support tables in 
  each side (front and rear).
- Rear support tables with stops, one stop for each rear support table;
- Front and rear squaring fences with 1 mechanical stop for each fence;

SAW BLADE CARRIAGE
- 1 motor for the main blade and 1 motor for the scoring blade;
- saw carriage driven by chain;
- Sliding on steel guide and special bronze wheels;
- Adjustment of the intermediate saw carriage return point on the entire cutting width;
- Mechanical system for blades changeover;

CONTROL UNIT
- Rotative console to control the machine on both working sides (front and rear)

SAFETY REGULATIONS 
- Emergency bar on cutting line, on the front and rear working sides;
- Front safety protection with plastic fingers with compass movement
- Electrical board with high safety features complete with:
* dust-proof cabinet (ip 55 protection) with padlockable main switch;
* Overload motor protection;
* Auxiliary low voltage circuit for the commands, the electronic controls
   and low voltage signals;
* safety microswitch on blade access door ;

INCLUDES:
- TM.06.37 - FIT 55 - Horizontal beam saw
- TM.05.95 - Machine version 380V - 50HZ
- TM.05.97 - Safety regulations - Brasil
- OF.02.31 - Saw carriage features
- Independent motor for saw and scratcher;
- Traction through fixed current;
- Quick change system of the saws;
- OF.02.27 - Analogic return control (potentiometer)
- OF.02.29 - Main blade motore 7,5 Hp and scoring blade motor 0,75 Hp
- OF.02.24 - Fixed table with fence 2000x380mm (1) and support tables 1250x380mm (2)
- OF.02.26 - Fixed table with fence 2000x380mm (1) and support tables 1250x380mm (2)
- TM.06.48 - 2No. Additional stops for the support tables 
- TM.06.61 - Additional blades set for Fit 55
Choose Quantity
+ Add to Cart
TEST
TECHNICAl DATA: 
- Blade projection mm : 55
- Maximum cutting height mm : 45
CUTTTING DIMENSIONS
- Standard version mm : 2900 x 2800
SPEED
- Adjustable blade feed speed m/min : from 10 to 30
- Blades feed (return speed) m/min : 30
- Analogical adjustment of intermediate return point  : Yes
BLADE SPEED
- Motor power Hp (kW) : 7,5 (5)
- Blade diameter/thicknesser mm : 250 x 4,2
- Axis diameter mm : 55
SCORING UNIT
- Motor power Hp (kW) : 0,75 (0,55)
- Blade diameter/thicknesser mm : 115 x 4,2
- Axis diameter mm : 45
WORK TABLES
- Height from floor mm : 850
- Tables with fence 2000 x 380mm (2)   : Yes
- Support tables 1250 x 380mm (4)  : Yes
INSTALLATION
- Installed motor power kVA : 9,1
- Compressed air Bar/PCM : 44475
- Exhaust system m/sec : 35
- Exhaust outlets diameter Pol : 1x6, 1x4

Added to cart
- There was an error adding to cart. Please try again.
Quantity updated
- An error occurred. Please try again later.
Deleted from cart
- Can't delete this product from the cart at the moment. Please try again later.