Caple Industrial Solutions
Currency
0

Paint Booth Positive Pressurized Dry Series Side Draft 5.0M*4.0M*2.8M

₹1,690,000.00 ₹2,112,500.00
Warranty
12 Months
GST Extra
18%
Available on Request
- Pressure Inside Paint Shop : Positive Pressurized
- Extraction Method : Dry Series
- Exhaust Draft : Side Draft
- Effective Exhaust Screen : 4,0m (W) X 2.0m (H)
Internal Dimensions
- A)  Paint Booth : 5,0m Length x 4,0m Width x 2,8m Height
- B)  Drying Booth : 6,0m Length x 9,5m Width x 2,8m Height
- C)  Machine Booth : 6,0m Length x 4,5m Width x 2,8m Height
- Structure/Construction of Clean Room : Sheet Panels
All Chamber Panels are made of electrolytically galvanized sheet Panels, double skinned with insulation material filling u-Puff.
Sheet Thickness ��������� 0,5mm And Wall thickness 50mm.
- Basement / Floor : Normal Civil Floor. In Water Level ���������0���?�
- Entrance/Painter Doors : 
Entrance doors made of electrolytically galvanized sheet panels, double skinned design. With Toughened Glass of mm t Observation Windows at alternate front panel.
Entrance Door/ Exit Door ��������� 2,25m W X 2,4m H X 3 Nos. Painter Door ��������� 1,0m W X 2,2m H ��������� 3 Nos.
- Air Supply of Booth : Vertical
- Air Velocity Rate : 0.2 m/s (In empty booth)
- Fresh Air Supply Unit : Motors Rating (Non Flame Proof)
  Backward Curve Design Centrifugal Blowers With Siemens/ABB Make Electric Motor(IE2), For Higher transfer 
  efficiancy and low electrical consumption.
Paint Booth - (18000m3/hour) 
Drying Booth - (18000m3/hour)
Machine Booth -  (14000m3/hour)
- Extraction Unit : Motors Rating (Non Flame Proof)
  Backward Curve Design Centrifugal Blowers With Electric Motor(IE2), For Higher transfer efficiancy and low electrical 
  consumption.
Paint Booth -  (14000m3/hour)
Drying Booth - (12000m3/hour)
- Solvent Hood : Flash off Booth��������� 02 Nos.
- Noise level in booth : + 80dba
- Lighting [Non Flameproof Fittings] : Polycab makes weatherproof fittings With Phillips LED Tubes 
A) Paint Booth - 20W x 2 - 10 Nos.
B) Drying Booth - 20W x 2 - 12 Nos.
C) Machine Booth- 20W x 2 - 06 Nos.
- Filters : First Stage (Fresh Air)
Non-Woven Synthetic Polyester Media In Pockets. G-4, EN 779/10Micron.
- Filters Roof Filters (Fine Filter) : Second Stage (Fresh Air)
Non-Woven Synthetic Polyester Tacky Media, Thermal Bonded, F-5 EN 779. (22mm Thickness) EU5 grade. 5 Microns.
- Filters - Optional : First Stage (Exhaust) Metallic Baffles
Made CR Powder Coated, in 1.2mm Sheet, Washable Filters.
90% Dust arrestance.
- Second Stage (Exhaust) : Paint Arrester Filter - Card board Media, G-3, EN 779.
- Electricity Main Supply : 415V, 3PH, 50C/S, AC4 Wire system.
- Current Load Requirement : Total Load - 30 KW
- Control Panel : 
Switch Gears - Schnieder
Hour Meter, -Selec
R.Y.B. Phase Indication, -Tecnic/Surdhi 
Motor Protection Circuit Breaker, - Schnieder 
Relays - Schnieder
Emergency Switch, -Tecnic 
Main On / Off Switch
Wires - Polycab
PB/SS - Tecnic/Selec/Surdhi
- Ducting : 
A) All Exhaust Duct In Elite Scope.
B) All Supply Ducts is In Elite Scope.
- Cabling : 
All Input Cables from Nearest Existing panel to Our Electrical Panel is In Customer Scope.
- Additional Items : 
1) Manometer - 03 Nos.
2) Combination Meter (Air Velocity Meter, Lux Meter)
Added to cart
- There was an error adding to cart. Please try again.
Quantity updated
- An error occurred. Please try again later.
Deleted from cart
- Can't delete this product from the cart at the moment. Please try again later.