SCM Single Head Multi boring Machine Startech 27 with 27 Spindles
₹750,000.00 ₹937,500.00
Available on Request
MAIN FEATURES:
- QUICK ATTACHMENT FOR EASY SETTING UP
- EVERYTHING INCLUDED AS STANDARD
GENERAL FEATURES:
Single head multiboring machine. It is capable to carry out horizontal, vertical and 45?
boring operations for wooden or similar materials machining.
Base and working table:
Structure made of bended and welded steel plates to create a large workpiece support
surface.
- right/left extensions with retractable stops L="3000mm"
- the extensions can be installed on the guides already mounted on the machine and are
positioned at 90 degrees with reference to the boring line; They are complete with no. 4
retractable stops (can be used also as rear guides)
- no.2 upper pressure cylinders for the workpieces hold-down
- compass device allows the quick positioning of the guide located opposite the one in use
without necessity of metrical rule reading
Gantry structure:
High thickness steel structure, with depth adjustment, to easily support the working stress.
Pneumatic cylinders for the workpieces locking when machining.
Operating unit:
Boring head with quick attachment spindles (32mm centre-to-centre distance), aluminium
structure and gears motion. Boring head movement through pneumatic piston.
- horizontal/vertical autom. positioning of boring unit
- adjustment, activated by pneumatic circuit, which allows the automatic boring head
rotation from control board
- spindles preset for quick change adaptors
- no. 9 drilling bit-holder bushes 10 mm diameter
- shaving suction means of outlet on the boring head and air conveyor on the base
Workpiece and operating unit movement
Automatic head movement for the horizontal and vertical boring unit positioning, with
locking at 45?.
Rear stops, lateral stops and extensions for long workpieces ensure the best working
precision.
SAFETY REGULATIONS:
Machine in conformity with the standard safety regulations according to the country of
machine destination.
TEST
TECHNICAL DATA
Startech 27 | ||
HEAD GROUP | ||
No. of spindles | No. | 27 |
Centre-to-centre distance between spindles | mm | 32 |
Spindles speed | rpm | 2800 |
Motor power of spindles | kW | 1,8 |
No. of revolving turret positions | No. | 5 |
Max stroke of boring unit | mm | 70 |
TOOL | ||
Maximum tool length | mm | 80 |
Max tool diameter | mm | 40 * |
PANEL | ||
Max. horizontal boring height | mm | 60 |
Max. width under the ?gantry structure? | mm | 1.025 |
Max. distance of vertical borings from panel edge | mm | 150 |
Min. panel thickness | mm | 10 |
Max. panel thickness | mm | 85 |
INSTALLATION | ||
Compressed air pressure | bar | 6 |
Compressed air consumption | Nl/cycle | 3,5 |
Exhaust outlets diameter | mm | 120+80+80 |
Exhaust air speed | m/sec | 20 |
Exhaust air consumption | m3/hr | 1466 |
Working table dimension | mm | 1.096 x 407 |
Worktable height from floor | mm | 900
|