Caple Industrial Solutions
Currency
0

Steam Heated Seasoning Plant Kiln-600CFT

₹700,000.00 ₹875,000.00
Warranty
12 Months
GST Extra
18%
Available on Request
Capacity of Kiln -  600 cft -Steam Heated Stacking parameters- L-16ft W- 8ft H-10ft power required 6 Hp 


1. Type Conventional, Overhead fan design
2. Operation Manually operated
3. Medium of Heating Steam 
4. Construction Masonry brick construction with RCC Roof. Prefabricated components and other 
equipment erected in place. All external pipings and controls at the back of kiln or 
on side as the case may be.
5. Controls Electrical control panel for forward / reverse, fast / slow control of motors. 
Sequential timer incorporated.
6 Fans 2 Fans
Dual Speed : 2No’s
Dia: 800
6. Features
• Specially designed class ‘H’ insulated motors, dual speed
• Axial fans with variable pitch aluminium blades, effective in both forward /  reverse directions.
• Electronic dual temperature indicator to indicate dry & wet bulb  temperatures in the kiln chamber.
• Thermal insulated doors, folding type.
• Aluminum false ceiling
• Special flow deflectors for laminar air flow.
7. Capacity Based on 1” thick timber with 1” square crossers with clearance at top and wooden 
beams at the bottom of stack.
Size of crossers remaining same, charge volume of a given capacity of kiln increases 
as the thickness of timber loaded increases.

SCOPE OF SUPPLY
01 Angular set, dynamically balanced 800 dia Axial Impeller with Aluminum cast blades operable in 
both directions 02 Nos.
02 Dual Speed "H" Class Insulated 2/3 HP Motors suitable for 440V, 50 Hz, AC supply, 3 Phase 02 Nos.
03 Heating media flow radiators out of finned tubes 42 Nos.
04 Fan Mounting Frame 02 Nos.
05 Airflow deflectors 04 Sets
06 Thermal insulated main door with frame Folding type. 04 No.
07 Thermal insulated inspection door with frame 01 No
08 Ceiling matrix channel 01 Set
09 SS Sparge Pipe (Internal only) 01 Set
10 False Ceiling with aluminum sheets 01 Set
11 Manual operated dampers with linkage 08 Nos.
12 Inspection Man Hole with Frame 01 Set
13 Digital Electronic Temperature Indicator with 04 Nos. of Sensors Probes 01 Set
14 Cold water Spray pump (for Hot Water/Thermic Fluid application only) 01 Set
15 Holdfasts 01 Set
16 Standard Piping, including valves, hardware, gaskets. Etc. 01 No.
17 Electrical Control Panel with sequential timer /PLC 01 Set
18 Insulation materials for external piping 01 Set

NOTE:
All civil works and electrical/electrification and earthing works to be carried out by customer.
Added to cart
- There was an error adding to cart. Please try again.
Quantity updated
- An error occurred. Please try again later.
Deleted from cart
- Can't delete this product from the cart at the moment. Please try again later.